Ghost 2 Immobiliser Problems
Created to guard vehicles from hacking and key cloning, to protect them from key cloning and hacking, the Ghost 2 immobiliser is a discrete device that is able to be installed without damaging your car. It stops you from starting your car unless you enter the correct sequence of buttons in your vehicle. This is similar to a mobile password.
Stop/Start
Ghost Immobilisers prevent vehicles from being stolen by preventing the engine from starting until it has the correct PIN code. This is accomplished without altering the vehicle, and is largely undetectable by thieves. The unit communicates directly with the ECU through the CAN databus to immobilise the vehicle. This is similar to that used by car manufacturers for years. However, thieves are unable to bypass it with a new key, or key relay technology, like they can do using factory-installed systems.
Ghost Ghost can be fitted to any vehicle, van motorhome, caravan, or bike with an engine and is compatible with all the popular brands of vehicles. The same system is also compatible with electric cars. It's a great alternative to wheel clamps and steering wheel locks.
If the Ghost is activated it will disable all buttons on your car and prevent the ignition from being started without a PIN code. This can be accomplished using the Android or Apple mobile app or by manually entering the code using your key fob. If the incorrect code is entered the app will show an indicator light. The Ghost will not let the vehicle to be restarted. This is a great deterrent and when the vehicle isn't started the thief will continue to pursue a new target.
The Ghost is a weatherproof, small device that is able to be hidden away in the most inaccessible parts of your vehicle. It is extremely easy to install with an average of 20-30 minutes per vehicle. It is also very simple to remove should you choose to move your vehicle around or return it for valet parking or service. It is an TASSA (Tracking and Aftermarket Security Systems Association) an insurance-approved system that is recognized by certain insurance companies. It also comes with an emergency lock that is secure Pin Code Override, and a Service/Valet mode that can be activated by pressing a button within the app or using your key fob.
Disarm
In contrast to the mechanical anti-theft devices, which are able to be removed, ghost immobilisers are hidden and are integrated into the car. Even if they were found in the car, thieves wouldn't be able to start the vehicle. They are nearly impossible to bypass or hack. This is because a ghost immobiliser blocks key hacking, signal jamming and device spoofing - methods that are used frequently by thieves to gain access to vehicles with standard immobilisers.
An immobiliser functions by sending a code to the ECU (electronic control unit). If a incorrect code is received and the vehicle doesn't start since the engine won't start. It is possible to disable a ghost immobiliser by using a software tool, but it's extremely difficult and time-consuming to accomplish this. Only an authorized installer is able to install and use the software.
The Ghost immobiliser, a small device, is hidden within the wiring loom of the vehicle. It is invisible to the naked eye after it has been installed. It won't show up on diagnostic systems, it does not have LED indicators, and it does not connect to the engine via the OBD port. It communicates silently via the CAN data circuit.
The system won't allow the vehicle to start until it is provided with an input PIN code that is entered by the user. The code is entered by pressing buttons on the steering wheels and door panels as well as the centre console. This is a safer way to protect your car as it does not require the use of keys or remote control.
In addition, Ghost also has the option of a service mode that can be activated using the application on your mobile phone. This allows you to give your keys to a person for service or valet parking without having to enter the disarm sequence.
It is not recommended to remove the system on your Ghost yourself, regardless of whether it's in service mode. This could damage the engine. It is recommended to contact an TASSA verified installer who can remove the system safely and properly. Our latest GHOST immobilisers have a specific fingerprint QR sticker hidden in various areas of your vehicle. They are connected to our security register. In the event that the device is removed and then is sold on the blackmarket this will allow you to trace the owner of the system.
Anti-Hijack
The anti-hijack feature is a key feature of the Ghost Immobiliser 2. This system is a smart key that shields your vehicle from theft. The Ghost system will automatically switch on the hazard lights and stall the car's engine when the ignition is switched on and the vehicle is stationary. This allows the driver and passengers time to press the hidden security button before the system can be activated.
In contrast to other systems that simply stop the engine once the ignition switch is turned on and on, the Ghost system uses a special controller and timer unit that will close the valve that cuts off fuel in the event that it is activated within an ghost immobiliser price agreed-upon time, even if the ignition is still in operation! The delay time frame must be long enough to allow the owner of the vehicle who was hijacked of the vehicle to drive away from the site of the robbery and sufficient distance from the vehicle that is stalled before the system is able to reactivate.
In addition to the standard CANbus immobiliser blocking features of the Ghost system, it also comes with an extra level of security that prevents common hacking methods used to gain access to modern cars such as relay attacks, key range extending and ECU swapping. This is due to the fact that the Ghost system is completely silent and doesn't emit any signals that could be detected by a thief using codes or RF scanning technology.
The Ghost system has a service / valet mode that allows your vehicle to be temporarily started and driven, without the requirement for a PIN code. This is a great option for those who park their car and only require it to be left for a short time in order to open the garage door or place groceries in the boot. The system will then exit the service mode based on speed and time, or via the simple input of a PIN code process. This gives you complete peace-of-mind that only YOU can drive your vehicle!
Keyless Entry
Many consumers are now seeking additional security measures because of the growing trend of thefts from cars using contactless. This is especially relevant for those who have put time or money into personalising their vehicles and own expensive or rare vehicles. An immobiliser add-on can be a cost-effective way to prevent this type of theft as it can stop your vehicle from starting until the correct pin code is entered into your key fob.
Immobilisers are made to work with a variety vehicle circuits including ones which control starter motors and fuel pumps. They can also disable the car alarm to draw attention and deter potential thieves.
These devices are directly connected to the engine control unit through the CAN data network. They stop the thief from gaining access to it by installing a replacement ECU or by using key programmers. The immobilisers are fitted in a discreet manner and leave no trace on your vehicle. They are also not detected by sophisticated tools used by thieves.
The Ghost immobiliser is unlike other systems that require drivers to carry tags or an app. Instead, you can choose your own pin sequence by pressing the pattern on your steering, door panel, or centre console. The pin can be changed as often as you want, which means it's as secure as a credit card and can be more difficult to hack because it requires up to 20 press.
Ghost also comes with a Valet/Service mode, which permits you to disable it if you plan to give your vehicle for valet parking, or for service. This allows the system to operate within parameters like a 30-mph speed limit. It is then reactivated by using the original key or key that corresponds to the entry code.
This makes it the most efficient and secure aftermarket CAN immobiliser available on the market. It is insurance-approved by Thatcham as an add-on for your car when fitted by one of our certified installers. The Ghost 2 immobiliser is also provided with six QR fingerprint labels and an ISR contact card that contains your unique QR code as well as an emergency number that is secure, all of which can be kept in the purse or wallet of your vehicle.